English
Electromagnetic-wave while-drilling probe measuring inclination, azimuth and tool-face angle with multi-stage amplification and professional noise filtering.
The Mining While-Drilling Probe (Electromagnetic Wave) continuously and dynamically measures key parameters such as borehole inclination, azimuth and tool-face angle during drilling. High-precision sensors capture weak physical signals, which undergo multi-stage amplification and professional filtering to extract the effective signal reflecting the true physical state.
Keeping a borehole on its designed trajectory requires continuous measurement of its attitude while drilling — inclination, azimuth and tool-face angle — because waiting until the hole is finished to survey it means corrections are expensive or impossible. The Mining While-Drilling Probe (Electromagnetic Wave) performs this measurement during drilling: the probe continuously and dynamically measures these key parameters as the drill string advances.
High-precision sensor components inside the probe capture the weak physical signals generated during drilling operations. These raw signals are too small and too noisy to use directly, so the probe applies multi-stage amplification to enhance signal strength and ensure processing accuracy. Professional filtering then removes environmental noise and interference — vibration, electromagnetic fields and other drilling dynamics — leaving the effective signals that reflect the true physical state of the borehole.
The electromagnetic-wave transmission version communicates the measured data without cable, simplifying drill-string assembly and avoiding the failures associated with cable drill rods. The result is a rugged measurement probe that gives drill operators continuous attitude feedback, enabling timely course corrections and accurate as-drilled borehole records in coal mines and other drilling applications.
| Parameter | Value |
|---|---|
| Measured Parameters | Borehole inclination, azimuth, tool-face angle |
| Signal Processing | Multi-stage amplification, professional filtering |
| Transmission | Electromagnetic wave |
| Measurement Mode | Continuous and dynamic during drilling |
| Application | Directional boreholes in coal mines |
Directional drilling trajectory control, gas drainage borehole measurement, underground drilling guidance, and while-drilling monitoring.
Flameproof and intrinsically safe belt surface flaw detection image processor for real-time detection of bulges, peeling, cracking, tearing, edge wear and belt-joint abnormalities, AC 127 V.
Four-module environmental monitoring system for metal and non-metal mines — safety monitoring, precise personnel positioning, wireless communication and emergency broadcasting with 2-hour UPS backup.
CAD-based mine design assistance system with GIS and 3D GIS technology for roadways, sections and intersections, integrating 2D and 3D design inside CAD for coal-mine engineers.
Flameproof solenoid valve with AC electromagnet drive for automatic one-way control of water and non-corrosive liquids in mines and other gas-risk environments.
Flameproof reversible vacuum magnetic starter for 380/660/1140 V mine motors up to 200 A, with local/remote control and overload, short circuit, phase-loss and leakage protection.
Flameproof and intrinsically safe vacuum feeder switch for 1140 V/660 V mine networks up to 1000 A, with undervoltage, overload, short circuit and selective leakage protection.
Flameproof and intrinsically safe mining speaker with an imported high-power stereo hi-fi amplifier chip for clear voice and alarms in roadways, rest rooms and parking areas.
Flameproof and intrinsically safe lithium battery power supply for underground coal mines, with automatic fast switchover and certified safe operation in gas and coal-dust environments.
Contact Us
The company is a provider of complete solutions for mine rail transportation dispatching systems and intelligent mine signal control and safety dispatching.
