English
Intrinsically safe 26 GHz radar material level sensor with 70 m range for solids and bulk materials in underground coal bunkers, compact cylindrical design.
The Intrinsically Safe Mining Material Level Sensor uses 26 GHz high-frequency radar measurement with intrinsically safe design and a maximum range of 70 m, mainly for solids and bulk materials. Its cylindrical form factor of approximately φ250 mm × 365 mm is designed with underground installation space and mining usage requirements fully considered.
Coal bunkers, silos and storage chambers underground hold bulk material whose level must be monitored for safe and efficient operation — too full and the conveyor backs up, too empty and production gaps appear. The Intrinsically Safe Mining Material Level Sensor measures these materials reliably using 26 GHz high-frequency radar, with intrinsically safe design and a maximum range of 70 m, mainly for solids and bulk materials.
High-frequency radar is well suited to dusty, misty and material-filled environments because radar waves penetrate dust and are not confused by the material surface. The 26 GHz frequency provides a good balance of penetration, reflection and beam concentration for mine bunker measurements. The sensor structure is designed with underground installation space fully considered: its cylindrical form factor is approximately φ250 mm × 365 mm, and the φ250 mm body size helps balance internal space for components with measurement performance.
Because the sensor is intrinsically safe, it can be installed over bunkers and silos in hazardous underground areas. It provides continuous, non-contact level data for coal and bulk materials, supporting automatic bunker management, conveyor coordination and accurate inventory tracking in the mine.
| Parameter | Value |
|---|---|
| Measurement Principle | 26 GHz high-frequency radar |
| Maximum Range | 70 m |
| Applicable Materials | Solids and bulk materials |
| Dimensions | Approximately φ250 mm × 365 mm |
| Safety Design | Intrinsically safe |
| Application | Underground coal and bulk material level monitoring |
Coal bunker level monitoring, silo inventory control, underground storage measurement, and bulk material management.
Flameproof and intrinsically safe belt surface flaw detection image processor for real-time detection of bulges, peeling, cracking, tearing, edge wear and belt-joint abnormalities, AC 127 V.
Four-module environmental monitoring system for metal and non-metal mines — safety monitoring, precise personnel positioning, wireless communication and emergency broadcasting with 2-hour UPS backup.
CAD-based mine design assistance system with GIS and 3D GIS technology for roadways, sections and intersections, integrating 2D and 3D design inside CAD for coal-mine engineers.
Flameproof solenoid valve with AC electromagnet drive for automatic one-way control of water and non-corrosive liquids in mines and other gas-risk environments.
Flameproof reversible vacuum magnetic starter for 380/660/1140 V mine motors up to 200 A, with local/remote control and overload, short circuit, phase-loss and leakage protection.
Flameproof and intrinsically safe vacuum feeder switch for 1140 V/660 V mine networks up to 1000 A, with undervoltage, overload, short circuit and selective leakage protection.
Flameproof and intrinsically safe mining speaker with an imported high-power stereo hi-fi amplifier chip for clear voice and alarms in roadways, rest rooms and parking areas.
Flameproof and intrinsically safe lithium battery power supply for underground coal mines, with automatic fast switchover and certified safe operation in gas and coal-dust environments.
Contact Us
The company is a provider of complete solutions for mine rail transportation dispatching systems and intelligent mine signal control and safety dispatching.
